Lexus NX350h 2022, Руководство пользователя

Страница: 328 / 804

Displays around the periphery of the G-force display, the left and right steering
amount, accelerator pedal input, and brake fluid pressure.
A
Acceleration G-force on the vehicle
B
Current G-force value (analyzed value of
front/rear and left/right G-forces)
C
Record of the maximum G-forces
The display is reset each time the hybrid system
is started.
D
Accelerator pedal input
E
Brake fluid pressure
F
Left steering amount
G
Right steering amount
If lateral G-forces of 0.5 G or greater are generated, the G-force value display will
turn amber and be held for 2 seconds. (Peak hold function)
This display is intended for use as a guideline. Depending on factors such as the
road surface condition, temperature and vehicle speed, the display may not show
the actual condition of the vehicle.
INFORMATION
●
The G-force values may not be zero even when the vehicle is parked, such as when it
is parked on an incline.
●
Depending on the vehicle usage conditions, the brake fluid pressure display may not
reach its maximum reading even though the brake pedal is fully depressed.
●
If a 12-volt battery terminal is disconnected and reconnected, the steering amount
display may be disabled temporarily. After driving the vehicle for a while, the display
will be enabled.
Energy monitor/EV driving ratio
*
The energy monitor and EV can be displayed on the multi-information display.
The energy monitor screen can be displayed on the center display.
■
EV driving ratio since starting
*
Displays the percentage of EV driving since starting.
It is reset each time the hybrid system stops.
* :
If equipped
5-2. Functions of the displays
326