Lexus LX 470 1998, Руководство пользователя

Страница: 296 / 337

CHASSIS
279
Regulations regarding the use of tire chains vary according to
location or type of road. Always check the local regulations
before installing chains.
Chain installation
Install the chains on the rear tires as tightly as possible. Do not
use tire chains on the front tires. Retighten chains after driving
0.5 − 1.0 km (1/4 − 1/2 mile).
When installing chains on your tires, carefully follow the
instructions of the chain manufacturer.
If wheel covers are used, they will be scratched by the chain band,
so remove the covers before putting on the chains.
CAUTION
D
Do not exceed 50 km/h (30 mph) or the chain
manufacturer’s recommended speed limit, whichever is
lower.
D
Drive carefully avoiding bumps, holes, and sharp turns,
which may cause the vehicle to bounce.
D
Avoid sharp turns or locked−wheel braking, as use of
chains may adversely affect vehicle handling.
REPLACING WHEELS
When to replace your wheels
If you have wheel damage such as bending, cracks or heavy
corrosion, the wheel should be replaced.
If you fail to replace damaged wheels, a tire may slip off a wheel or
they may cause loss of handling control.
Replacement with used wheels is not recommended as they may
have been subjected to rough treatment or high mileage and could
fail without warning. Also, bent wheels which have been
straightened may have hidden structural damage and therefore
should not be used. Never use an inner tube in a leaking wheel which
is designed for a tubeless tire.
Wheel selection
When replacing wheels, care should be taken to ensure that they
are equivalent to those removed in load capacity, diameter, rim
width, and offset.
Correct replacement wheels are available at your Lexus dealer.
A wheel of a different size or type may adversely affect handling,
wheel and bearing life, brake cooling, speedometer/odometer
calibration, stopping ability, headlight aim, bumper height, vehicle
ground clearance, and tire or snow chain clearance to the body and
chassis.