94
LC500_LC500h_QG_OM11444U_(U)
5
Repeat the steps above to program another device for any of the remaining Home-
Link
®
buttons.
■
Programming a rolling code system
1
Locate the “Learn” or “Smart” button
on the garage door opener motor in
the garage.
This button can usually be found where
the hanging antenna wire is attached to
the unit. The name and color of the but-
ton may vary by manufacturer. Refer to
the owner’s manual supplied with the
garage door opener motor for details.
2
Press and release the “Learn” or
“Smart” button.
Perform
3
within 30 seconds after
performing
2
.
3
Press and hold the desired Home-
Link
®
button (inside the vehicle) for 2
seconds and release it. Repeat this
sequence (press/hold/release) up to 3
times to complete programming.
If the garage door opener motor oper-
ates when the HomeLink
®
button is
pressed, the garage door opener
motor recognizes the HomeLink
®
sig-
nal.
Содержание LC500 2017
Страница 4: ...4 LC500_LC500h_QG_OM11444U_ U...
Страница 102: ...102 LC500_LC500h_QG_OM11444U_ U...