Lexus ES 300(h), Руководство пользователя

Страница: 356 / 534

355
5
5-3. Using the air conditioning system
In
ter
ior f
eat
ur
es
1
Press the automatic mode switch or
select “AUTO” on the sub function
menu. (

P.350)
2 Press the outside/recirculated air
mode switch to switch to automatic
air intake mode.
The air conditioning system automatically
switches between outside air and recircu-
lated air modes.
3 Adjust the temperature setting.
4 To stop the operation, press the off
switch or select “Off” on the sub
function menu. (

P.350)
If the fan speed setting or air flow
modes are operated, the automatic
mode indicator goes off. However,
automatic mode for functions other
than that operated is maintained.
■
Using automatic mode
Fan speed is adjusted automatically accord-
ing to the temperature setting and the
ambient conditions.
Therefore, the fan may stop for a while until
warm or cool air is ready to flow immedi-
ately after the automatic mode switch is
pressed or “AUTO” is selected.
Cool air may blow around the upper body
even when the heater is on due to sunlight.
■ Windshield fog detection function
When automatic mode is set, the humidity
sensor detects fog on the windshield and
controls the air conditioning system to pre-
vent fog.
■
Automatic mode for air intake control
In automatic mode, the system detects
exhaust gas and other pollutants and auto-
matically switches between outside air and
recirculated air modes.
When the dehumidification function is off,
and the fan is operating, turning automatic
mode on will activate the dehumidification
function. The next time the dehumidification
function is turned off, the AUTO mode for
switching between outside air and recircu-
lated air modes is canceled.
WARNING
■ nanoe™ generator (if equipped)
Do not disassemble or repair the genera-
tor because it contains high voltage
parts. Contact your Lexus dealer if the
generator needs repair.
NOTICE
■
To prevent damage to the nanoe™ (if
equipped)
Do not insert anything into the front cen-
ter vent on driver’s side, attach anything
to it, or use sprays around the front cen-
ter vent on driver’s side. These things
may cause the generator not to work
properly.
Using automatic mode