
Page 5
LEXUS — Remote Engine Starter
OPERATION
REMOTE ENGINE START
To start a vehicle remotely, press and release the LOCK button twice within two
seconds, then press and hold the LOCK button for three seconds.
FOLLOWED IMMEDIATELY BY:
TWO SECONDS
A) Press and
release
the LOCK
button.
B) The hazard
lights flash
once.
D) The hazard
lights flash
again.
C) Press and
release the
LOCK
button again.
D) The engine
starts and the
hazard lights
flash for 20
seconds.
20 SECONDS
STEP 1.
Press and release the LOCK button on the remote twice within two seconds. The hazard lights will
flash each time.
STEP 2.
Press and hold the LOCK button on the remote for three seconds. The hazard lights flash once when
pressed, then again after three seconds. The engine starts, and the hazard lights flash for 20 seconds.
THREE SECONDS
A) Press and
hold the
LOCK
button for
three
seconds.
B) The hazard
lights flash
once.
C) After
three
seconds,
the hazard
lights flash
again.
UNLOCK
UNLOCK
UNLOCK
NOTE:
Vehicles started with the Remote Engine Starter can idle for a total of 20 minutes, however
automatic engine shutdown occurs after 10 minutes of run-time. You can always restart the Vehicle after
this initial shutdown. Once the total run-time exceeds 20 minutes the vehicle must be manually started
inorder to reset the Remot Engine Starter.
NOTE:
For vehicles equipped with Piezo, the buzzer will chirp the same number of times that the light
flashes.
For any questions or concerns about the Remote Engine Starter, please call Lexus Customer Relations
at (800) 255-3987.