RESET WATER SENSOR AND WATER LEVEL
1. Reset the water sensor
(Empty basin before activating this mode).
●
A reset water sensor is required when the water level is out of range.
** Note :
- This will also reset the water level to default = 3.
- Click should be pressed slowly.
- Press and hold the SteamHeat Button for 3 sec to resume system operation or the system will
be automatically resumed if no action is taken in 20 sec.
2. Adjust The Water Level For Auto-Fill (Empty basin before activating this mode).
** Note :
- Click should be pressed slowly.
- Press and hold the SteamHeat Button for 3 sec to resume system operation or the system will
be automatically resumed if no action is taken in 20 sec.
14
