OPERATE Auto-Fill
™
/Jet Switch:
15
Digital Control
Panel
Drain
Knob
Hot/Cold
Water Knob
Auto Fill /
Jet Switch
Locate the control panel at the front of the spa base.
Follow the instructions below to operate the pedicure spa
OFF
Push in button for manually
shut off water
● Twist Auto-Fill/Jet switch clockwise then release to start auto-fill. Water will automatically shut off
when it reaches the water sensor level.
● To manually stop Auto-Fill water filling, twist the Auto-Fill/Jet switch clockwise again.
● Twist drain knob clockwise to start draining. Twist it back when the draining is done.
● Use “Hot/Cold water knob” to manually adjust the water temperature.
● Push button on the Hot/Cold Water Knob to turn on/off main water valve.
*** Water control knob is on by default.
It should be shut down at the end of the day or
when unattended to prevent water damage risks.
● By default, Eco-Jet will automatically turn on
when the water level is full. To turn off the Eco-
Jet manually, click the “Whirlpool button” on the
digital control panel.
*** DO NOT DRAIN WATER WHEN ECO-JET IS
RUNNING, OR THE DEVICE WILL BE BURNT OFF.
Control
Panel
On/Off Push
Button
ON
Содержание PRIVE LOUNGE
Страница 1: ......
Страница 6: ...INSTALLATION OF PEDICURE SPA SEAT 5 1 FOLD UNFOLD BACK REST MASSAGE CLICK...
Страница 27: ......
Страница 28: ......