Chemical Emissions
Printer emissions testing is performed in accordance with the “Test
method for the determination of emissions from hardcopy devices with
respect to awarding the environmental label for office devices with
printing function according to RAL-UZ 122, “BAM April 2006”.
Emitted
Substance
Product Measurement
(Monochrome)
Maximum according
to Guideline (Mono)
Ozone (mg/h)
<0.05
1.5
Styrene (mg/h)
0.14
1.0
Benzene (mg/h)
<0.02
<0.05
Dust (mg/h)
0.3
4.0
TVOC (mg/h)
7.68
10
Emitted
Substance
Product Measurement
(Color)
Maximum according
to Guideline (Color)
Ozone (mg/h)
<0.05
3
Styrene (mg/h)
0.36
1.8
Benzene (mg/h)
<0.02
<0.05
Dust (mg/h)
0.6
4.0
TVOC (mg/h)
15.6
18
*Note: The print test is performed using genuine Lexmark supplies. Emissions
may vary if using non-Lexmark supplies.
Product Restricted Materials
The reduction of materials harmful to persons or the environment is a
significant part of Lexmark's commitment to continuously improving the
environmental design of all our products and services. Lexmark has
developed a multi-layered due diligence process to ensure that all
materials going into Lexmark products are safe and compliant with
global regulations regarding hazardous substances.
This product is compliant with the requirements of the European Union's
Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment (RoHS).
This product is compliant with the requirements of the European Union’s
R
egistration,
E
valuation,
A
uthorization and
R
estriction of
Ch
emicals
(REACH) regulation.
This product and its packaging are labeled as required by China’s
“Management Methods for Controlling Pollution by Electronic Information
Products.”
The product does not contain
:
Cadmium
Hexavalent chromium
Polybrominated biphenyls
Polybrominated diphenyl ethers
Mercury
Asbestos
Short chain chlorinated paraffins
Polychlorinated phenols
Polychlorinated terphenyls
Ozone depleting chemicals (Chlorofluorocarbons (CFCs), halons,
HCFCs, HBFCs, 1,1,1-trichlorethane, carbon tetrachloride, methyl
bromide)
Halogenated flame retardants in cover sets
Badge Reader Authentication
– Holds print jobs until released by
the user at the printer interface by swiping an identification badge
(Hard drive option and integration services required through SPR)
Toner Darkness Control
– Adjusts the print darkness to conserve
toner
Color Saver
– Conserves toner by printing images and graphics
lighter
Extra High Yield Toner Cartridges
– More toner per cartridge
reduces the energy and materials used per printed page
Voluntary Environmental Certifications
This product conforms to the following
voluntary
environmental program
criteria:
US EPA ENERGY STAR V 1.1
Recyclable Design
Mechanical plastic parts over 100g consist of one or more easily
separable materials.
Use of non-separable connections between different materials, such as
gluing or welding, has been avoided.
Product Description:
Measurements provided are for a non-packaged product.
Weight
105.57 kg | 232.74 lbs (without cartridge)
Width
611 mm
| 24.06 in
Depth
657 mm
| 25.87 in
Height
1204 mm | 47.40 in
For safe lifting, mechanical handling systems should be considered at
this level. When this is not practicable, specially trained persons or
services should be used.
Operational Data
Speed (Letter – ppm)
Up to: 50
Speed (A4 - ppm)
Up to: 47
Power
Printing Duplex 850 W
Printing Simplex 810 W
Ready 75 W
Sleep 17 W
Hibernate 0.75 W
Off 0 W
Typical Electricity Consumption Test
(TEC)
6.787 kwh/week
Typical Electricity Consumption Test
Eco-Mode (TEC)
3.93 kwh/week
Acoustic
Noise
Printing Simplex (mono / color)
52 dBA / 52 dBA
Printing Duplex (mono / color)
52 dBA / 53 dBA
Idle
27 dBA
