Lexmark X940E, Руководство по обслуживанию

Страница: 397 / 815

Diagnostic aids
3-41
7510
Factory Defaults
Warning: This operation cannot be undone.
This setting enables you to restore all of the printer’s settings to the base printer settings, the network settings,
or to remove all Lexmark Embedded Solutions (LES) applications.
To restore the Factory Default settings:
1. Touch
Factory Defaults
from the Configuration Menu.
2. Touch
Restore Base
to restore all non-critical base printer NVRAM settings.
3. Touch
Restore Network
to restore all network NVRAM settings.
4. Touch
Restore LES
to remove all Lexmark Embedded Solution applications
.
When you select either value, the LCD displays
Restoring Factory Defaults
and then
Resetting the
Device
. The device immediately performs a POR and restores the appropriate settings to their factory default
values.
The following settings are not changed:
•
Display Language (general settings)
•
Network/Ports Menu
•
Standard USB, USB (x) Menus (if an ENA is installed)
Energy Conserve
This menu controls what values appear on the Power Saver menu. If Off is selected in the Energy Conserve
menu, then
Disabled
appears in the Power Saver menu, and Power Saver can be turned off. If
On
is set in the
Energy Conserve menu, the Power Saver feature cannot be disabled.
To change this setting:
1. Touch Energy Conserve from the Configuration Menu. [setting's current value] appears on the
touch-screen.
2. Touch or to scroll through the setting's possible values.
3. Touch
Back
to cancel and return to the Configuration Menu.
4. Touch
Submit
to save the change.
Min Copy Memory
Values will only be displayed if the amount of installed DRAM is at least twice the amount of the value, that is, at
least 200 MB of installed DRAM is required to display the 100 MB selection.
To change this setting:
1. Touch
Min Copy Memory
from the Configuration Menu.
[setting's current value]
appears on the
touch-screen.
2. Touch to decrease the setting's value; touch to increase the setting's value.
3. Touch Back to cancel and return to the Configuration Menu.
4. Touch Submit to save the change.