UEL
1
@PJL ENTER LANGUAGE = PCL5
ESC E
2
(O&
3
.......
4
EXIT;
5
UEL
6
1
Universal Exit Language: ESC%-12345X
2
PCL reset command
3
Memorex entry sequence
4
PRESCRIBE commands
5
Memorex exit sequence
6
Ends the print job
Overview of limitations
Although the PRESCRIBE emulation option works in most environments, there are environments where the option is
not applicable.
Incomplete command set
Most PRESCRIBE II commands are not supported. Some commands are partially supported. For example, the BARC (bar
code) command is supported for only a subset of the possible bar code types.
One base emulation supported
Kyocera printers support a number of base emulations. The PRESCRIBE emulation option supports PCL 5e only. PCL 5e
emulation is used for the entire print job, or the print job is formatted using PRESCRIBE commands.
Some print jobs depend on a default PRESCRIBE environment based on an emulation of IBM Proprinter. A Proprinter
default environment setup is supported by the PRESCRIBE emulation option. See the FRPO section for details (under
the P1 parameter section). Starting with the P30 release, the Line Printer setup is also supported.
Font substitution
Kyocera supports a large number of resident bitmap fonts. The PRESCRIBE emulation option supports many of these
bitmap fonts by substituting a resident outline font. Hence, some of the fonts differ slightly in style and size, but the
spacing of the substituted fonts match Kyocera.
No edge
‑
to
‑
edge printing
Many Kyocera printers allow printing to the physical edges of the paper, which is commonly referred to as edge-to-
edge printing. The PRESCRIBE emulation option allows printing within 2 mm of the physical paper edge. See the FRPO
section for details (under the L parameter section).
Introduction
5
