background image

1

Type the printer IP address into the address field of your Web browser.

Note: If you do not know the IP address of the printer, print a network setup page and locate the IP address in 

the TCP/IP section.

2

Click Device Status. The Device Status page appears, displaying a summary of supply levels.

Ordering supplies

To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies 

dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the 

place where you purchased the printer.

Warning—Potential Damage: Damage caused by the use of a supply or replacement item not produced by the 

manufacturer of this printer is not covered under warranty. Degraded print quality may result from using supplies or 

replacement items not produced by the manufacturer of this printer.

Note: All life estimates for printer supplies assume printing on letter

‑ 

or A4

size plain paper.

Ordering toner cartridges

When 

88 Cartridge is Low

 appears or when the print becomes faded:

1

Remove the toner cartridge.

2

Firmly shake the cartridge side

to

side and front

to

back several times to redistribute toner.

3

Reinsert the cartridge and continue printing.

Note: Repeat this procedure multiple times until the print remains faded, and then replace the cartridge.

Recommended toner cartridge part numbers

Part name

Regular cartridge

Lexmark Return Program Cartridge

Toner cartridge

X340A21G

X203A11G

Ordering a photoconductor kit

When 

84 PC Kit Life Warning

 appears on the display, the photoconductor kit is near its end of life. Order a 

photoconductor kit so that one is available when 

84 Replace PC Kit

 appears.

You can also check the status of the photoconductor kit by printing a network setup page.

Maintaining the printer

8

Содержание X203N series
















Отзывы: