38
Load print media
Step 4: Load print media
Loading the trays
Note:
If you load any print media other than plain letter or
A4 paper into any source, make sure you change the
Paper Type and Paper Size settings for that source. Refer
to the Publications CD for detailed information.
When you load the tray, do not exceed
the maximum stack height indicated by
the label in the tray. Overfilling the tray
may cause jams. This applies to all
printer trays, drawers, and feeders.
Before loading print media into any
source, flex the sheets back and forth to
loosen them, and then fan them. Do not
fold or crease the print media. Straighten
the edges of the stack on a level surface.
Complete these instructions to load print
media into any of the standard or optional
trays. All trays are loaded in the same
way.
1
Remove the tray.
