Lexmark Optra N model 240, Руководство по обслуживанию

Страница: 17 / 105

Diagnostic Information 2-4
4040 Finisher
43 Paper Jam (PI-3) There is a paper jam at the top
cover. If the error code does not
clear after you clear the paper jam,
go to the
“Paper Jam, 43, Delivery
Paper Sensor Service Check” on
page 2-13
. If there is still a problem
after that, go to the “Symptom Table”
on page 2-7 .
44 Paper Jam (PI-4) There is a paper jam at the staple
tray or output bins1, 2, or 3. If the
error code does not clear after you
clear the paper jam, go to the
“Paper
Jam, 44, Staple Tray Paper Sensor
Service Check” on page 2-13
. If
there is still a problem after that, go
to the
“Symptom Table” on page 2-7 .
45 Staple Jam The printer has detected a staple
jam in the finisher. See the User’s
Guide.
47 Finisher Bin X Full Empty the output bin identified in the
message and select CONTINUE.
48 Top Output Bin Full Empty the top output bin and select
CONTINUE. If this doesn’t correct
the problem, go to the Optra N
Service Manual.
49 Output Bins Full All three output bins are full. Empty
all three bins as well as the top
output bin, if Top Bin Linking is set
on. Then select CONTINUE.
If this doesn’t correct the problem,
go to the
“Distance Detecting Sensor
Service Check” on page 2-10 .
Message Action