Lexmark Optra M410 Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 312

Lexmark Optra M410 Скачать руководство пользователя страница 70

58

Chapter 3: Using the Operator Panel and Menus

Format Flash

Yes
No

Formatting the flash memory option deletes all resources (fonts, macros, symbol sets) stored
in flash memory and prepares the flash memory card to receive new resources.

The

Format Flash

menu item only displays if the installed flash memory option is

not defective

or Read/Write or Write protected.

51 Defective Flash

may display when the printer is turned

on, or during flash format and write operations. See

51 Defective Flash

on page 161 for more

information.

Warning: If you select

Format Flash

and press

Go

, any data stored in flash memory is lost.

Do not turn off the printer while the flash is formatting.

Defragment Flash

Yes
No

Defragmenting the flash memory option transfers all undeleted resources stored in flash
memory to printer memory and then reformats the flash memory option. When the format
operation is complete, the undeleted resources are loaded back into flash memory.

The

Defragment Flash

menu item only displays if the installed flash memory option is

not

defective or Read/Write or Write protected.

51 Defective Flash

may display when the printer is

turned on, or during flash format and write operations. See

51 Defective Flash

for more information.

37 Insufficient Defrag Memory

displays if printer memory is too full to perform the Flash

Memory Defragment operation. See

37 Insufficient Defrag Memory

on page 160 for more

information.

Warning:

Do not turn off the printer while the flash is defragmenting.

Format Disk

Yes
No

Formatting the hard disk option deletes all resources stored on the hard disk and prepares it
to receive new resources.

The

Format Disk

menu item only displays if the installed hard disk option is

not defective or

Read/Write or Write protected.

61 Defective Disk

may display when the printer is turned on, or

during disk format and write operations. See

61 Defective Disk

on page 165 for more infor-

mation.

Format Disk

does

not display if

Job Buffer Size

is set to

100%

. See

Job Buffer Size

on

page 77 for more information.

Warning: If you select

Format Disk

and press

Go

, any data stored on the hard disk option is

lost.

Do not turn off the printer while the hard disk is formatting.

Utilities Menu (continued)

Menu Item

Values

«
...
68
69
70
71
72
...
»

Содержание Optra M410

























































































































































































































































































































Отзывы:

Нет отзывов