93
If the End-of-Job Timeout is greater than the
DISCINTV
value, errors are very likely
to occur if the printer requires user intervention. If, on the other hand, the End-of-Job
Timeout is smaller than the
DISCINTV
value, an error is certain to occur the first time
the MarkNet card times out after a completed print job. Therefore, the End-of-Job
Timeout should be set to 0 (disabled).
The End-of-Job Timeout can be set with the MarkNet configuration procedure. Please
refer to the Lexmark
Network Adapter User's Guide
.
For activation timeout errors, set the connect timer or activation timer in the PSF
settings to 30 second or greater.
