Notes:
•
Make sure that all paper fragments are removed.
•
If the 3000
‑
sheet tray is installed, then slide the tray to the
right to open the door.
7
Close door C.
[x]
‑
page jam, press latch to access area
G. Leave paper in bin. [40y.xx]
1
Remove all paper from the staple finisher bin.
2
Press the latch and slide the staple finisher to the left, and then
remove the jammed paper.
Notes:
•
Make sure that all paper fragments are removed.
•
If necessary, turn spinner wheel G1 downward to feed
jammed paper into the finisher bin, and then remove the
paper.
3
Slide the finisher back into place.
4
Open door C, and then remove the jammed paper.
CAUTION—HOT SURFACE:
The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
Notes:
•
Make sure that door C does not hit any cable attached to the
printer.
•
Make sure that all paper fragments are removed.
•
If the 3000
‑
sheet tray is installed, then slide the tray to the
right to open the door.
5
Close door C.
13
