Lexmark MarkNet Pro, Быстрый старт

Страница: 5 / 21

5
Print a network setup page
Look for the UAA (universally
administered address) under
the Network heading on the
setup page. The UAA is a
12-digit number. The left
column shows the address in
MSB form and the right
column shows the address in
canonical form.
Push the Test button on the MarkNet. A network setup page prints at parallel
port 1. This page shows the physical address of the MarkNet (UAA) and other
important data. Save this page because you will use it later.
Configure and print
The UAA is preset at the
factory. However, you can
override it with an optional
locally administered address
(LAA) if you want some
particular physical address for
this print server.
About the Drivers, MarkVision and Utilities CD
You may have more than one version of this CD, received at different times
with different Lexmark products. Always use the latest version CD.
TCP/IP
Step 1: Set the IP address, netmask and gateway
For instructions on other ways
to set the IP address, look on
the Drivers, MarkVision and
Utilities CD. Click View
Documentation and look for
the MarkNet link.
You must assign an IP address, netmask and gateway to the MarkNet in order
for other network devices to find the MarkNet and attached printers on the
network.
• If you have DHCP, the proper addresses are automatically assigned. To
verify the assignment has happened, print a network setup page and make
sure the IP address, netmask and gateway appear as non-zero.
2
3
Network environment Page
TCP/IP (Windows, OS/2, UNIX)
”Step 1: Set the IP address, netmask and gateway”
”Step 2: Set up to print”
5
7
Novell NetWare
”NDPS (Novell Distributed Print Services)”
”Non-NDPS (queue-based)”
9
9
AppleTalk 10
OS/2 Warp Server 10