Appendix
49
Printing beyond the basics
3 Select Create Diskettes.
4 Follow the instructions on the
screen.
To install the printer software from
diskettes:
1 Start Windows.
2 Insert Setup Disk 1 into your
disk drive.
3 From the Start menu, select
Run.
4 In the command-line text box,
type the letter of your disk drive,
followed by :\setup (for
example, a:\setup), and then
click OK.
5 When prompted by the printer
software, insert the appropriate
disks into your disk drive, and
click OK.
6 Follow the instructions on the
screen.
Uninstalling printer
software
If your printer software does not
install properly, you may need to
uninstall, and then reinstall it.
To uninstall the printer software:
1 From the Start menu, select
Programs.
2 Select Lexmark Z12 Series.
3 Select Uninstall.
4 Follow the instructions on your
screen.
To reinstall the printer software,
follow the appropriate set of
instructions from
Power supply
If your power supply fails, replace it
with the Lexmark replacement part
or other UL LISTED Direct Plug-In
Power Unit marked “Class 2” and
rated 30 V dc at 500mA.
Safety information
• If your product is NOT marked
with this symbol
, it MUST be
connected to an electrical outlet
that is properly grounded.
• The power cord must be
connected to an electrical outlet
that is near the product and
easily accessible.
• Refer service or repairs, other
than those described in the
operating instructions, to a
professional service person.
• This product is designed, tested
and approved to meet strict
global safety standards with the
use of specific Lexmark
components. The safety
features of some parts may not
always be obvious. Lexmark is
not responsible for the use of
other replacement parts.
