Lexmark C91 Series, Руководство по обслуживанию

Страница: 160 / 493

3-10
Service Manual
5055-xxx
Print tests
Input Source Print Tests
The Diagnostic Input Source Print Tests may be used to verify that
the printer can print on media from the installed input sources, which
are available within the Print Tests menu. Chose from following:
•
Single (prints the Print Test page once).
•
Continuous (prints the Print Test page until Return or Stop is
pressed).
The content of the Print Test page varies depending on the media
installed in the selected input source. If a source is selected that
contains paper, then a page similar to the Quick Test page prints. If a
source is selected containing envelopes, the Envelope Print Test
pattern prints. This pattern contains text of each character in the
selected symbol set.
If Continuous is selected, all sources printing with paper sizes print
the same page continuously until the test is stopped. If the source
contains envelopes, then the envelope print test pattern prints on the
first envelope and subsequent envelopes are blank.
Note: The Print Test page can be printed on any paper or envelope
size. More than one sheet may be required. The Print Test page
always print in simplex.
While the page prints, the following message is displayed: The
Power indicator also blinks while the page prints. If Single is
selected, no buttons are active while the Print Test page prints. If
Continuous is selected, Return or Stop can be pressed to cancel
the test, producing the following message:
<source>
Printing...
Canceling...