manualshive.com logo in svg

Lexicon RT-10, Руководство пользователя

Поделиться
Скачать
Lexicon RT-10 Скачать руководство пользователя страница 18

Format

Logo

Disc Compatibility Requirements

Additional Information

Getting Started

RT-10

1-5

DVD-V

DVD-A

The RT-10 supports:

•

5-inch (12cm) or 3-inch (8cm) discs

•

Dolby Digital, DTS, MPEG, or PCM (Linear) digital
audio

•

MPEG-2 video

•

Single- or double-sided discs

•

Single- or dual-layered discs

The RT-10 supports:

•

5-inch (12cm) or 3-inch (8cm) discs

•

Linear or PCM (Packed) digital audio (discs might
also include Dolby Digital, DTS, or MPEG digital
audio and MPEG-2 video)

•

MPEG-2 video

•

Single- or double-sided discs

•

Single- or dual-layered discs

•

Discs are divided into titles, which are further
divided into chapters.

•

Discs are divided into groups, which are further
divided into tracks.

DISC COMPATIBILITY

The RT-10 is compatible with disc formats that meet the
requirements listed in the tables that begin below. Refer to the Disc
Care & Handling section (1-8), the Loading Discs section (4-2), and
the Disc Maintenance section (5-16) for more information.

. . . Disc Compatibility continues on page 1-6

Note:

The RT-10 is not compatible with DVD-ROM,
DVD-RAM, CD-ROM (except those that include
compatible MP3 tracks), and Photo CD formats.

Содержание RT-10













































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды