Lexicon PCM NATIVE STRINGBOX, Руководство пользователя

Страница: 24 / 28

18
The Parameters
The PCM Native plug-ins contain presets covering a wide range of needs, but you can refine
and customize any preset by adjusting its parameters. Parameters are the building blocks within
each preset that determine how it sounds and behaves.
Each PCM Native plug-in contains a set of parameters, and a variety of those parameters are
combined to create a preset.
Following are all the algorithm parameters you can edit in the PCM Native Stringbox Plug-in.
Chorus
Controls the amount of detuning in each course of strings.
Decay Envelope
Controls how the note rings after a key is deselected. Open means that the note will ring until it
dies away. The Damped settings causes it to die more quickly.
Delay Mode
Determines whether the predelay uses an absolute value (milliseconds) or a note value related
to the tempo of the mix.
Keyboard
This region shows which keys of the virtual piano have been pressed, indicating which pitches
will be resonated. If the Note Selection parameter has been set to Keyboard, then notes may
be selected by clicking on keys.
Low Bright, Mid Bright, High Bright
This parameter controls the target brightness of strings in each of four zones. This is the
brightness of the string as it reaches the end of its decay. Lower brightness means that the
string becomes duller as it decays. This may be adjusted by selecting the blue tab and then
shaping the blue line above the keyboard.
Low Decay, Mid Decay, High Decay
This parameter controls the decay time in each of four zones. This may be adjusted by selecting
the red tab and then shaping the red line above the keyboard.
Content Checked