Lexicon PCM NATIVE ROOM, Руководство пользователя

Страница: 39 / 44

31
Room Control
Pattern Category
This parameter lets you select a specific category from which a room response may be chosen.
Changes here have a direct effect on the Pattern Selector parameter.
Pattern
Selects a space available in the selected Category (see Patern Category parameter).
Early Predelay
This parameter adds a small amount of delay to a signal before it enters the reverberator. This is
used to create a little separation between the wet and dry signals, in turn creating greater clarity
in the mix. This delay can also be toggled into Tempo Mode, causing the delay to follow the
DAW’s session tempo.
Reverb Predelay
This parameter adds a small amount of delay to the reverb tail. This delay can also be toggled
into Tempo Mode, causing the delay value to be related to the tempo of the music.
Room Scale
This parameter is used to modify the overall time of the selected early impulse. It is a multiplier
that goes from 0.5x to 2.0x. The actual time of the responses varies from response to response.
The Early Scale parameter simply scales that amount of time. It’s fair to describe this as “rubber-
banding” the impulse response.

!
NOTE:
Though the term “impulse” is used in this manual, these algorithms are NOT
convolution reverbs!
Bass XOver
This parameter is closely tied to the Bass Boost parameter. It represents the frequency below
which early bass boost has an effect.