Lexicon LXP-15, Руководство пользователя

Страница: 69 / 92

6-3
MIDI Operation
Two LXP-15s can be slaved together by connecting a cable from the MIDI OUT
jack of the master to the MIDI IN jack of the slave. Additional LXP-15s can be
slaved to the master by connecting a cable from the MIDI THRU port of one slave
unit to the MIDI IN port of the next unit. All of the LXP-15s must be set to the same
MIDI channel.
INPUT OUTPUT
POWER
LXP-15
exicon
HEADROOM
OVL
12
18
24
VIEW
ADJUST PAGE
Reverb
Pitch/EQ
Dly
Setup
Store
Name
Global
MIDI
Level
Mod
Alg
Patch 1
Patch 2
Patch 3
Patch 4
Sys
INPUT OUTPUT
POWER
LXP-15
exicon
HEADROOM
OVL
12
18
24
VIEW
ADJUST PAGE
Reverb
Pitch/EQ
Dly
Setup
Store
Name
Global
MIDI
Level
Mod
Alg
Patch 1
Patch 2
Patch 3
Patch 4
Sys
MIDI In
MIDI Out
Master
Slave
When connected in this way, the slave LXP-15(s) will be remotely controlled by
the front panel of the master as follows:
• In general, whenever the master’s ADJUST knob is used to change a
parameter value, a corresponding parameter change will occur on the
slave(s).
• Loading presets or registers from the setup page in either the “Preset” or
“Register” modes will cause the slave(s) to load their preset or register
of the
same number. (Note: a slave’s register contents will not necessarily be the
same as the master’s.)
• Loading presets or registers in either the “PreScan” or “RegScan” modes will
cause the slave(s) to select the preset and register
of the same number. The
“Load” button of the slave must be pressed to actually load the preset or
register.
• Changes made on the “Store” page are not transmitted to the slave(s).
Creating Patches using
MIDI SysEx Patches can also be created using LXP-15 MIDI System Exclusive data. This is
perhaps the most complicated but also the most flexible way of creating patches
to control the LXP-15.
Chapter 7 provides the information necessary for programming LXP-15 MIDI
SysEx data.
Slaving two or more
LXP-15s