16
Set Up Cubase LE 4 for Use with the I
•
ONIX U82S
(Mac
®
)
1. Make sure the included USB cable is connected to your computer and to
the U82S, and the U82S is turned on.
2. Open Cubase LE 4 (located in the Applications folder), and go to
Devices>Device Setup
as shown below.
3. Click
VST Audio System
and select
Lexicon I•ONIX U82S
as the ASIO
Driver if it is not already selected.
4. Cubase
®
LE 4 will now ask you if you would like to switch the driver.
Select
Switch
then
OK
.
5. Ensure the driver is loaded by clicking
Reset
. Then click
OK
.
Mac
®
OS 10.4.x users only
: After selecting
Lexicon I•ONIX U82S
as the
ASIO Driver, you may need to verify that your device inputs are active. To
do this, follow these steps:
Select
1.
Device>VST Connections
from the menu bar.
When the VST Connections panel appears, click the
2.
Inputs
tab.
The box under the Audio Device column may say “
3.
Not Connected
”. If
it does, click in this box and select
Lexicon I•ONIX U82S
to enable the
U82S inputs.
Close the VST Connections window.
4.
You are now ready to start recording with Cubase LE 4, described in the
next section.
