Using the MP-100
4
4
Lexicon
Naming Effects
1.
Click on the Program name in the top center of the effect processor display to open a name dialog.
2.
Type in a new name.
3.
On the keyboard, press Return.
Saving Effects
Save your edited effects in the File pop-up menu to the right, under the Effect Type pop-up.
1.
To save the current Program, select Save Effect.
2.
To save all Programs of the same Effect Type, select Save Bank.
3.
In the file dialog that appears, select a name and location for the file. (You might want to create
a special folder for your MP-100 effects.)
4.
Click Save.
Loading Effects
Load effects from disk into the MP-100 as follows:
1.
Pull down the File menu.
2.
To load a single Program, select Load Effect.
3.
To load a complete Program Bank, select Load Bank.
4.
In the file dialog that appears, find and click on the file you want to load.
Effect settings are saved with your Song. If you want to use your edited effects in other Songs, you
can save and load them separately.
Editing Effects
You can create your own programs or edit any of the programs with the editor. To open the MP-100
interface, click the Edit button on the MP-100 Rack Xpander. Skip the following section on MMIO
applications, and read about the MP-100 features and controls under
The Interface.
