6
English
UNPACKING THE DEVICE
BATTERY INFORMATION
When unpacking, ensure that the following elements are included:
1 x Yayé
®
koala
1 x instruction manual
WARNING:
All packaging materials, such as tape, plastic sheets, wire ties and tags are not part of this
toy and should be discarded.
Yayé
®
koala operates with 3 x 1,5V
AAA/LR03 batteries (included).
This product is supplied with batteries for demonstration purposes. They should be replaced
with new batteries before use.
WARNING:
Remove and discard the plastic tab before playing.
Battery replacement
1. Open the pocket located under the toy. Using a screwdriver, open
the battery compartment inside the product.
2. Remove the used batteries and insert 3 new AAA/LR03 batteries
observing the polarity indicated in the compartment, and as per the
diagram shown below.
3. Close the battery compartment and tighten the screw.
Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed
from the product before being charged. Rechargeable batteries are only to be charged under
adult supervision. Different types of batteries or new and used batteries are not to be mixed.
Only batteries of the same or equivalent type as recommended are to be used. Batteries are to
be inserted with the correct polarity. Exhausted batteries are to be removed from the product.
The supply terminals are not to be short circuited. Do not throw batteries into a fire. Remove the
batteries if you are not going to use the product for a long period of time.
WARNING:
Mal-function or loss of memory may be caused by strong frequency interference or
electrostatic discharge. Should any abnormal function occur, remove the batteries and insert them
again
Image A
1. “Lightshow” button
2. “Music” button
3. “Magic” button
4. “Record” button
5. “Play” button
PRODUCT FEATURES
AAA/LR03
AAA/LR03
AAA/LR03
Image B (inside the toy)
6. “ON/OFF” button
7. “Volume” wheel
8. “Mode selector” switch
MFB200IM1200.indd 6
26/05/2010 11:44