ENGLISH
18
19
ENGLISH
Press any key except (Snooze) to stop the alarm. It will start again the next day at the same time.
OR
Press to repeat (snooze) the alarm. The snooze icon flashes. To stop the alarm while the snooze is activated,
press and hold any button except for 2 seconds. The snooze icon will disappear once the alarm is stopped.
Setting the duration for the snooze
1. Select a ringtone
In clock display mode, press until is displayed to activate the polyphonic ringtones alarm mode. Press to
toggle between the 8 ringtones available (CHM1 to CHM8). The last ringtone displayed will be selected. Press and hold
to preview the alarm tone.
2. Set the alarm time
3. When the alarm rings:
The polyphonic melody will start at the selected alarm time in low volume and will increase within approximately 60 seconds to
full volume. If the alarm is not stopped, it will automatically stop after an hour.
Setting the Polyphonic Ringtones Alarm
Setting the Radio Alarm
1. Select a preset radio station
In clock display mode, press until displayed to turn the radio alarm on. Press to toggle between the 12
preset radio stations available (PRE01 to PRE12). The last preset station displayed will be selected. Press and hold to
preview the preset station.
Note:
you can select your own preset stations. To do so, refer to the radio section on page 22.
2. Set the alarm time
3. When the alarm rings
If the alarm is not stopped, it will automatically stop after an hour.
Additional settings in clock setting mode:
• Press to toggle between 12 and 24 hour display.
• Press to toggle between RCC on and off.
Selecting the time-zone and clock display language
1. In clock mode, press and hold for 2 seconds to enter time-zone and language setting mode.
2. The currently selected language is blinking. Press or to select one of the 6 following languages:
French(
FRA
), English(
ENG
), Spanish(
ESP
), Portuguese(
POR
), Italian(
ITA
), German(
DEU
)
3. Press to confirm and return to clock mode. The clock will automatically start to scan the for the RCC signal.
Note:
the time zone is automatically updated when you choose a language.
Alarm modes
Discovering the 3 alarm modes
Serenity
®
Clock includes 3 alarm modes. Press to toggle between the 3 types of alarm display:
Polyphonic Ringtones Alarm
Radio Alarm
Awakening Mode
Setting the slarm time
1. Press and hold for 2 seconds. The display shows the current alarm time, and the hour is blinking.
2. Press and to set the hour and confirm with .
3. The minutes are blinking. Press and to set the minutes and confirm with .
Press and hold for 2 seconds while in clock mode. Press 4 times.
The snooze icon flashes. You can set the time before the clock repeats the snooze alarm between 5 and 12 minutes
(DUR 05 - 12). Press and to set the minutes and confirm with .
Setting the duration for the snooze
18-19
21/07/2006 17:54:29