LEXIBOOK RL010DP, Руководство пользователя, Страница: 14 / 55

41123_ProjectionClock_multilingual_DINA5.FH10 Tue Nov 29 10:22:03 2005 Seite 14
C M Y CM MY CY CMY K
18
INSTALLATION
CONNECTING THE UNIT TO THE MAINS
Only connect the mains adapter supplied to an easily accessible 230 V ~ 50 Hz power socket.
Batteries will disconnect automatical, if the AC cord is plugged in. Now in the display the digits
"00:00" are flashing and the background illumination is on.
BACKUP-BATTERY
If the mains adapter is pulled from the power socket or there is a power failure this clock runs on
two batteries (AAA size).
TO INSTALL THE BATTERIES
Remove the battery compartment door by inserting a small screwdriver, paper clip or similar item
into the tab while gently pushing to remove.
Insert two batteries (size AAA/1,5 V) into the battery compartment. Be sure to observe the polarity
markings which are engraved inside the battery compartment. If the batteries are inserted
incorrectly, the unit will not operate. Replace the battery compartment door.
CAUTION !
- Use only the size and type of batteries specified.
- Do not mix different types of batteries together.
- If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
GB