Copyright © Lexibook 2004
5
LOW BATTERY INDICATION:
Receiver: A low battery indicator
will display continuously when the batteries need replacing. On
the transmitter,
will be displayed.
Setting the remote sensor
Unscrew the battery cover and insert batteries to begin the settings.
HOUSE CODE
will flash for 8 seconds.
Select HOUSE CODE (1-15) by pressing
°C/°F
and then press
SET
.
The house code is the frequency signal sent by the remote sensor
to the receiver. The remote sensors for each receiver must be set
to the same HOUSE CODE and remember to press
SET
.
CHANNEL
will flash for 8 seconds.
Select CHANNEL (1-3) by pressing
°C/°F
and then press
SET
. The
channel function allows the receiver to identify each remote sensor. Each receiver
can receive up to 3 different remote channels. The preferred channel number (1, 2 or 3) for
each individual remote sensor can be assigned. However, channel 1 is used for collecting data
from outdoor and activating the weather forecast symbols. If you only have one remote sensor,
please set it at channel 1 and place it outdoors.
Humidity & Temperature will display .
Select °C or °F of Temperature by pressing
°C/°F
key.
The SM1600 comes with one receiver and one remote sensor. If you wish to buy additional sensors
please refer to the section ACCESSORIES at the end of this manual.
Use a different house code if your weather station detects other signals from neighbouring sources.
Else, use default settings: house code = 01 and channel = 01