“I try to
recharge the
batteries, but I
still get a
warning that
they are low.”
You need to
replace the batteries
. Please note these
safety warnings:
■
Use only
NiMH (Nickel Metal Hydride)
rechargeable
batteries, as supplied with the handset.
■
Dispose of used batteries safely
— never burn
them, or put them where they could get punctured.
Using your Big Button Combo on a PBX
“Last Number
Redial and/or
memory dialling
don’t work.”
When you first make a call, try pressing the
/P
button for a
pause
between the outside line access digit
(e.g. 9) and the telephone number. You should later be
able to redial the number.
When storing numbers in memory, you can include the
outside line access digit
(e.g. 9) with each number.
If your PBX requires you to wait for a second Dial tone
before dialling the telephone number, press the
/P
button for a pause between the access digit and the
number.
“My phone
won’t work
properly on a
PBX.“
You may need to change the
recall
setting. There’s a
switch for this on the side of the base telephone, marked
‘
100ms 300ms
’ (100 or 300 milliseconds). Try moving
this switch to the other position and see if that helps
If in doubt, call the Help Line for advice. It will help if
you have your PBX documentation to hand when you
make the call.
If the fault persists …
◆
Disconnect all other instruments
connected to the
same line as the Big Button Combo and see whether
you can make a call.
◆
Disconnect the base telephone
from the telephone
line and plug a different phone into the master
Troubleshooting
32
E:\Binatone2003\BigButtonCombo\BigButtonCombo_01.vp
23 December 2003 11:47:01
Color profile: Generic CMYK printer profile
Composite Default screen
