LCT 340
Using the mic
②
④
⑤
③
①
High-pass filter indications
·
The currently active high-pass setting is illuminated.
Setting a high-pass filter
·
High-pass filters can be set by adjusting the recessed slide
switch. Settings are: Off, 12 dB / octave at 40 Hz and 6 dB /
octave at 150 and 300 Hz. High-pass filters eliminate unwanted low
frequency noise such as structure borne noise.
Illumination push button
·
By briefly pressing the recessed illumination push button the
illuminated indications can be turned on or off.
Attenuation indications
·
The currently active attenuation setting
is illuminated.
Setting an attenuation level
·
Attenuation levels can be set by adjusting the
recessed slide switch. Settings are: off, -6 dB,
-12 dB and -18 dB. Attenuation is used in extremely
high SPL environments in order to prevent clipping of
the microphone, mixer and other audio equipment.
User-interface
②
Recessed attenuation slide switch
③
Illuminated high-pass filter indications
④
Recessed high-pass filter slide switch
⑤
Recessed illumination push button
①
Illuminated attenuation indications
05
