11
10.
Specifications
Type
Condenser, permanently polarized
Acoustical operating principle
Pressure gradient transducer
Transducer Ø
17 mm, 0 .67 in
Polar pattern
Cardioid
Sensitivity
16 .7 mV/Pa, -35 .5 dBV/Pa
Dynamic range
123 dB (A)
Equivalent noise level
19 dB (A)
Max. SPL for 0.5 % THD
142 dBSPL
Supply voltage
48 V +/- 4 V
Current consumption
3 .1 mA
Internal impedance
100
Ω
Rated load impedance
1,000
Ω
Connector
Gold plated 3-pin XLR
Mic enclosure
Zinc die cast
Microphone dimensions
138 x 52 x 36 mm, 5 .43 x 2 .04 x 1 .42 in
Microphone net weight
310 g, 10 .9 oz
Table 10 .1
Microphones measured according to: IEC 60268-4
Phantom power according to: IEC 61938
Noise measurement according to: IEC 60268-1
11.
Accessories
//
DTP 40 Mts - Mic mount
Rubber microphone mount. Provides firm grip and attenuates structure borne
noise . Compatible with 3/8" and 5/8" threads .
//
LCT 40 Wx – windscreen
This one is especially useful when using the microphone outdoors, to shield the
capsule from wind . Can also be used for vocal recordings, to protect the capsule
from moisture .
//
DTP 40 Lb - transport bag
Microphones which are not in use should not remain on the stand gathering dust
or be unnecessarily exposed to humidity . Unmount it and put it into the supplied
DTP 40 Lb transport bag .
//
LCT 40 SH - shock mount (optional)
A shock mount is recommended for most recording applications as it reduces
unwanted structure-borne noise .The open front of the shock mount allows you
to position the microphone as close as you like to the source .
//
LCT 50 PSx - magnetic pop filter (optional)
The magnetic pop filter was designed to perfectly integrate with the design of the
microphone and its shock mount. A pop filter not only helps to avoid plosives and
hisses on your recording, but also protects the condenser capsule from being
exposed to moisture .
Compatible with LCT 40 SHx, LCT 40 SHW, LCT 40 SH .
