2
//
Operating the microphone
The following will walk you through all the settings of your DGT 650.
Standard Mode
//
This is the default state of the device when you power it on (the LEWITT logo is illuminated white).
Settings Mode
//
This is where you can change all the settings on your DGT 650 including recording modes,
monitoring options, high-pass filters, pre-attenuation and gain. The illuminated LEWITT logo will turn off as soon
as the microphone switches to Settings Mode. Press the jog dial (
9
) to switch from setting to setting and rotate it to
change the selected setting.
Recording Mode
//
The selected recording mode symbol is lit. Rotate the jog dial to change the recording mode.
Press the jog dial to switch to the next setting.
Monitoring Mode
//
Use the jog dial to blend between tape return monitoring and direct monitoring (
2
). The LED
graph (
6
) shows the mixture of the two modes. Press the jog dial to switch to the next option.
High-pass Filter
//
Set the high-pass (
4
) with the jog dial. Press the jog dial to switch to the next option.
Pre-Attenuation
//
Set the pre-attenuation (
5
) by rotating the jog dial. Press the jog dial to switch to the next option.
Headphone/Output Gain
//
The headphone symbol is lit. Rotate the jog dial to change the output volume.
Input Gain
//
Press the jog dial until the input gain symbol is lit. The settings will change depending on the selected
recording mode. You can set input gain levels for all 4 recording modes individually.
Stereo Mode selected
//
Gain L R will be lit. Rotate the jog dial to change the gain for both capsules together.
Cardioid Mode selected
//
Gain L R will be lit. Rotate the jog dial to change the gain.
Singer/Songwriter Mode selected
//
Gain L will be lit first. This lets you set the gain for the left channel – in this
mode, it’s the cardioid microphone. Press the jog dial; Gain R will now be lit. This lets you change the gain of the
right channel – in this mode, it’s line input.
Stereo Line Mode selected
//
Gain L R will be lit first. This lets you change the left and right-channel gain settings
together. Press the jog dial again; Gain L will be lit. This lets you adjust the gain of the left input separately. Press
the jog dial again to change the gain of the right channel separately.
//
DGT 650
DOwnlOAD THe
COnTROl CenTeR
!
ReAD THe
FUll MAnUAl
!
QUICkSTART GUIDe
COnTROl yOUR DGT 650 AnD CHAnGe ITS
SeTTInGS FROM yOUR COMPUTeR
www.lewitt-audio.com/DGT-Series/DGT-650/Downloads
leARn eveRyTHInG AbOUT yOUR DGT 650
www.lewitt-audio.com/DGT-Series/DGT-650/Downloads
