9
C A R E & M A I N T E N A N C E
Check Filter Indicator
Cleaning the Filters
Cleaning the Air Purifier
The Check Filter Indicator will light up as a
reminder to check the air filters. Depending on
how often you use the air purifier, the indicator
should turn on within 6-8 months. You may not
need to change your filters yet, but you need to
check them when the indicator light turns on.
Reset the Check Filter Indicator by pressing the
black Filter Indicator Reset Button in the vent
on the side of the air purifier (see page 11).
A.
The Fine Preliminary Filter should be
cleaned once a month to increase
efficiency and extend the life of your
filter. Clean the Fine Preliminary Filter
using a brush or vacuum hose to
remove hair, dust, and large particles.
B.
Do not
clean the True HEPA Filter. Fine
dust may be released back into the air
if cleaning is attempted.
Only
clean the
Fine Preliminary Filter.
C.
The Activated Carbon Filter does not
require cleaning.
•
Unplug before cleaning.
•
Wipe the outside of the air purifier with
a soft, dry cloth. If necessary, wipe
the housing with a damp cloth, then
immediately dry.
•
Vacuum the inside of the air purifier.
•
Do not
clean with water or any other
liquid, to avoid risk of electric shock.
•
Do not
clean with abrasive chemicals or
flammable cleaning agents.
A
B
C
Replacing the Filters
1.
Unplug the air purifier, then remove the
filter cover. (see
Getting Started
page 6)
2.
Remove the old filters.
3.
Clean out any remaining dust or hair
inside the air purifier using a vacuum
hose.
Do not
use water or liquids to
clean the air purifier.
4.
Unwrap the new filters. Place the High-
Efficiency Activated Carbon Filter inside
the housing. Make sure the pull tabs are
facing out.
5.
Install the Fine Preliminary/True HEPA
Combination Filter into the housing.
Make sure the pull tabs are facing out.
6.
Replace the filter cover. The air purifier
will not turn on unless the filter cover is
replaced correctly.
7.
Reset the Check Filter Indicator (see
page 11).
