7
CARE & MAINTENANCE
Cleaning the Air Purifier
1.
Unplug before cleaning.
Figure 2.1
Check Filter Indicator
will light up as a reminder to check the filter.
Depending on how often you use the air purifier,
the indicator should turn on after about 4–6
months. You may not need to change your filter
yet, but you should check it when turns on.
Note: Do not
clean with abrasive chemicals or
flammable cleaning agents.
2.
Wipe the outside of the air purifier with a
soft, dry cloth. If necessary, wipe with a
damp cloth, then immediately dry.
3.
Vacuum the inside of the air purifier using
a vacuum hose with a crevice attachment.
[Figure 2.1]
Resetting the Check Filter
Indicator
Reset the Check Filter Indicator when:
A.
lights up red.
1.
Replace the filter (see page 8).
2.
With the air purifier plugged in and
the fan turned off, press and hold the
Control Button for 3 seconds.
3.
will blink 3 times and turn off when
successfully reset.
B.
The filter was changed before lit up.
1.
With the air purifier plugged in and
the fan turned off, press and hold the
Control Button for 3 seconds. This will
turn on .
2.
Press and hold the Control Button
again for 3 seconds.
3.
will blink 3 times and turn off when
successfully reset.
Cleaning the Filter
The outer pre-filter should be cleaned every
2–4 weeks to increase efficiency and extend
the life of your filter. Clean the pre-filter using
a soft brush or vacuum hose to remove hair,
dust, and large particles.
Do not
clean the filter
with water or other liquids.
Filter
When to Clean
How to Clean
When to Replace
Pre-Filter
Every 2–4
weeks
Use a soft brush or vacuum
hose
[Figure 2.1]
4–6 months
Personal HEPA
& Activated
Carbon Filter
Do not
clean
