manualshive.com logo in svg

Levo AG active-easy LAE, Инструкция по эксплуатации и обслуживанию

Поделиться
Скачать
Levo AG active-easy LAE Скачать руководство пользователя страница 17

17

6.

 

Standing

 

 
Your LEVO active-easy isn’t just an active wheelchair. It is also a standing aid which enables you 
to stand up simply and quickly, right there, when and where you need to. 
 
 
General tips 
Standing up stresses your body in ways you may not be used to. For this reason, 

please consult 

your doctor or physical therapist before using the LEVO active-easy

 to make sure you do not 

suffer from any conditions (e.g. strong contractures or osteoporosis) which make standing 
potentially harmful. 
The LEVO active-easy may only be brought into the standing position on firm, level ground (risk of 
tipping over). 
 
Before standing up, apply both brakes on the LEVO active-easy. 
Please beware of parts of the wheelchair where one might conceivably trap or catch parts of the 
body when standing up, in the space between the side panel and the seat as well as in the pivot of 
the side panel. Be sure to protect yourself and accompanying persons from possible injury. 
 
 

7. 

The knee support and chest strap 

 
The most important safety features of the LEVO active-easy are the knee support and the 
chest strap. It is absolutely essential that these be correctly in place before you attempt to 
stand up (risk of accident).

 

 
 
7.1. 

The knee support 

 
The knee support holds the knees in an extended posture and prevents you slipping out of the 
wheelchair while standing up. 
  
Attach the two eyes of the knee support to the double-head screws on either side of the wheelchair 
(see photo left). 
 

  

 

 
Center the knee support in front of each knee using the velcro fasteners, then pull it until it is sitting 
firmly in place, just below (not right on) the knee cap and not too tight (see photo above right). 
 
 

Содержание active-easy LAE



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды