Leviton OneReach, Руководство по установке

Страница: 10 / 16

3 INSTALLATION INSTRUCTIONS
8
3.3 Hook-up for the 1-Port PI Source
3.3.1 Route hybrid cable to location where the PI Source is to
be mounted.
3.3.2 Mount the PI Source using four appropriate #8 screws to the 1U
mounting bracket. Unless the Source is to be fastened directly to
grounded metal, place a ground lug under one of the 4 mounting screws
and route to appropriate grounding point via minimum #12 bonding
conductor
(See section 3.5) .
3.3.3 With no power applied to the PI source, attach conductors to the
appropriate terminal one at a time and tighten each terminal screw of
the dual terminal block. Surge Suppression is strongly recommended,
see page 13.
3.3.4 Connect the terminated LC duplex connectors to the PI Source.
3.3.5 Make the network connection to RJ45 connector.
3.3.6 Remove fiber dust caps and clean connector end faces with a fiber optic
cleaner. Plug in duplex LC connector.
3.3.7 Connect either the barrel (or M8) connector from the AC power supply to
the PI Source.
3.3.8 Plug the power supply into the AC outlet.
3.3.9 Ensure that the PI Media Source “Pwr” LED Indicator is illuminated.
DC Output Connection
AC Power
Input Connection
1-Port PI Source
Duplex LC
Connection
1U Mounting
Bracket
LAN Connection
Power Connections:
white/black conductors
LC Duplex
WEB
VERSION