Page 19 of 32
User Guide
Leviton MC 7500 Series Memory Lighting Controllers
Example: Clear Stack 1 (assuming Stack 1 set as above example).
1.
Press
Clear
Function button (next stack shows
*
).
Stack Step Fade Page Setup
1:2<*
0:00.0
1
2.
Press STACK FADE
GO
button (stack shows
*<*
).
Stack Step Fade Page Setup
*<*
0:00.0
1
Substitute moving the
Stack Fade
crossfader instead of pressing the
Stack Fade
GO
button in the above
examples.
Snapshot
This feature allows a
snapshot
to be taken of the
Scene A
slide controls and sent to stage, fading at the master
fade rate.
Each press of the
SNAPSHOT GO
button will cause a new
snapshot
to fade to stage.
Pressing the
SNAPSHOT CLEAR
button causes the snapshot scene to fade out.
In the
Wide Mode
(
sngl scn
)
Scene B
slide controls will represent the additional channels and will be sent to stage
as one complete snapshot with
Scene A
.
Example: Take Snapshot of scene A twice, then clear it.
1.
Rotate encoder until fade rate =
0:02.0
(to show fading),
Stack Step Fade Page Setup
*<*
0:02.0
1
2.
Set
Scene A
preset sliders to various levels.
3.
Tap SNAPSHOT
GO
button and note channels fading on channel level LEDs.
4.
Set
Scene A
preset sliders to different levels.
5.
Tap SNAPSHOT
GO
button and note channels fading on channel level LEDs.
6.
Tap SNAPSHOT
CLEAR
button and note channels fading out.