Hot (Black)
Neutral (White)
Fan
Fan Speed Control
Black
Green
Ground
Black
White
Red
Line
120VAC, 60Hz
Wiring Diagram - Single Location Control Application
COLOR CONVERSION PROCEDURE
The color of this device can be changed to suit your
interior design requirements. Simply obtain a color
conversion kit of the appropriate color from your Leviton
distributor and proceed as follows (please note that
wallplate must be removed).
1. Select the color of the face you desire.
2. The frame has snaps on its sides. Using your fingers,
grip around the Decora
®
frame and push on one side to
release it from the strap (see Figure 2).
3. Take the new frame and position it properly to the
strap. Line up the plastic snaps with the square holes
in the strap. Insert the snaps on one side of the frame
into the strap.
4. Firmly press sideways and down to slip the other snaps
into place. The frame snaps in with a audible click.
Ensure that all four snaps are secure.
5. Moving the slider up or down will automatically engage
the slider control mechanism. Replace Decora
®
wallplate. The color conversion is complete.
TO OPERATE
•
GREEN LED will remain ON when the fan is OFF
- Facilitates access to switch in the dark.
•
Raise slider from full bottom stroke to ON position
- Fan will turn ON (GREEN LED will turn OFF) at
level set by slider.
•
Move slider control lever up or down
- Fan will increase or decrease in speed
respectively for desired level.
•
Lower slider to full bottom stroke to OFF position
- fan will turn OFF (GREEN LED will turn ON).
TROUBLESHOOTING
•
Fan does not turn ON and ON/OFF LED does not
turn ON
- Circuit breaker or fuse has tripped.
- Fan has burned out.
- Fan is not connected to line Neutral.
Figure 2 - Color Conversion
Frame
Strap
Snaps
Push in 2 Locations
ON/OFF
LED
Slider
