Leviton Decora Smart DG6HD, Руководство по началу работы, Страница: 13 / 16

13
Manually start/stop joining
When you first power on your dimmer or perform a factory reset
the green status light will automatically flash. This indicates
the dimmer is in joining mode. It will remain in this state for
30 minutes or until the dimmer is added to a network. To manually
start or stop joining mode, perform the following steps:
1. Hold the top of the paddle for 7 seconds. Status light will
turn amber.
2a. To start joining mode tap the top of the paddle 1 time.
The status light will flash green rapidly to indicate it is in
joining mode.
2b. To stop joining mode tap the top of the paddle 1 time. The
dimmer will leave joining mode.
NOTE : the device can still be operated manually even if not
joined to a hub.
Factory default
To reset dimmer to factory settings and place into joining mode:
1. Hold the top of the paddle for a total of 14 seconds.
2. After the first 7 seconds the light turns amber. Continue
to hold.
3. After a total of 14 seconds, the status light will quickly flash
red/amber.
4. Release the top of the paddle and the dimmer will reset.
WEB
VERSION