9
10
11
12
14
13
15
16
What to do if...
Safety first
Limited 2 Year Warranty &
Exclusions
Visit leviton.com/decorasmart or contact technical services
for additional help.
When power is applied, the light turns on but the dimmer
is not able to change the light level:
•
For proper operation the dimmer needs a line (hot), neutral,
load, and ground connection.
•
Confirm the white conductor is a neutral.
•
If using LED or CFL bulbs, make sure they are dimmable.
The dimmer does not dim low enough or begins to flicker
at the low end of the dimming range:
•
Use the My Leviton app to increase the minimum dim level
to the point that does not cause the LED bulb to flicker.
Intermittent dimmer operation:
•
Confirm the load does not exceed its ratings.
Not connected to Wi-Fi:
•
If your device is setup in the My Leviton app, select your
device, then select “Device Settings”. On the “Device
Settings” screen, select “Reconfigure Wireless”.
•
Follow the prompts to reconfigure your device and update
the Wi-Fi settings.
How do I clean my device?
•
To clean use a damp cloth with mild soap. DO NOT use
disinfecting products, including foggers, sprays or other
types of atomized cleaning agents.
For Leviton’s limited product warranty, go to
www.leviton.com.
For a printed copy of the warranty,
call 1-800-824-3005.
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton
in writing at Leviton Manufacturing of Canada ULC to the attention of the Quality Assurance
Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone
at 1 800 405-5320.
FCC COMPLIANCE STATEMENT
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (i.) This device may not cause harmful interference (ii.) This device must accept any
interference received, including interference that may cause undesired operation. Any changes
or modifications not expressly approved by Leviton could void the user’s authority to operate this
equipment. This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION
Any changes or modifications not expressly approved by Leviton Manufacturing Co., Inc., could void
the user’s authority to operate the equipment.
FCC SUPPLIER’S DECLARATION OF CONFORMITY
Model D26HD – Wi-Fi Dimmer is manufactured by Leviton Manufacturing Co., Inc. 201 N. Service
Road, Melville, NY 11747. www.leviton.com This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
IC STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
RF EXPOSURE AND CO-LOCATION
To comply with FCC OET Bulletin 65 and ISED RF exposure limits for general population and
uncontrolled exposure, this device shall be installed and operated with a minimum distance of 7.9
inches (20 cm) between the radiator and your body. Also, must not be co-located or operated in
conjunction with any other antenna or transmitter.
Status LED
Diagnostic LED
Please see My.Leviton.com support for additional
diagnostic assistance.
If your device is not connecting to the My Leviton app, the Status
LED can be used as a diagnostic tool. Press the top rocker for at
least 2 seconds (but no more than 7 seconds) then release.
The Status LED will blink a diagnostic code for 2 seconds.
COLOR
ACTIVITY
STATUS
Green
Flashing
In setup mode and ready to be added
to a Wi-Fi network.
Green
Slow Blink
Connecting to a Wi-Fi network on
power up.
Green or
Off
Solid
Normal operation, can be configured
in a setup.
Amber
Slow Blink
Device is not connected to the Wi-Fi
network but attempting to reconnect.
Green/
Amber
Alternating
Blink
Device is in wireless Anywhere
Companion Pairing Mode.
Red
Blink
Wireless Anywhere Companion
devices have unpaired or at max
number of paired devices.
Green/Red/
Amber
Alternating
Blink
Identify feature triggered from the
My Leviton app.
COLOR
STATUS
Amber
Not connected to Wi-Fi.
Red
Connected to Wi-Fi but not able to connect to
the My Leviton cloud.
Green/Amber,
Alternating
Connected to Wi-Fi and My Leviton cloud but
unable to set the time from the internet.
Green
Connected to Wi-Fi and My Leviton cloud is
working properly.
Setup mode
Factory default reset
WARNINGS:
•
TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER
at circuit breaker
or fuse and test that power is off before wiring!
•
TO AVOID FIRE, PERSONAL INJURY OR PROPERTY DAMAGE, DO NOT
install to control a receptacle, a motor, or transformer operated appliance.
•
This product is to be installed and/or used in accordance with electrical
codes and regulations.
•
For indoor use only.
•
If you are unsure about any part of these instructions, consult an electrician.
CAUTIONS:
•
Use with compatible 120V dimmable LED/CFL bulbs, incandescent, halogen,
or magnetic-low-voltage (MLV) fixtures only. Use a Leviton electronic low
voltage dimmer to control electronic (solid state) low voltage transformers.
For a list of compatible LED and CFL bulbs refer to www.leviton.com.
•
DO NOT mix bulb types when multiple bulbs are used with one dimmer.
Using the same make/model of each bulb will enhance
dimmer performance.
•
The Decora Smart D26HD dimmer is not compatible with standard 3-way or
4-way switches. It must be used with up to 4 Decora
®
Smart DD00R-DL or
DD0SR companions for wired multi-location dimming.
•
Maximum wire length from dimmer to all installed companion devices
cannot exceed 300 ft (90m).
•
Save this instruction sheet. It contains important technical data along
with testing and troubleshooting information which will be useful after
installation is complete.
•
Dimmer may feel warm to the touch during normal operation.
•
Recommended minimum wall box depth is 2-3/4”.
•
Use this dimmer with copper or copper clad wire only.
•
Leviton Wi-Fi enabled devices rely on Wi-Fi communication. For customers
looking to install a large number of devices it is recommended to
consult the wireless network’s access point specifications to determine
the maximum number of supported Wi-Fi devices. In some cases, for
example large installations, it may be necessary to upgrade to newer high
performance wireless grade access points to ensure proper operation.
ADDITIONAL RATINGS:
•
Purpose of control: Operating Control
•
Action Control Type: 1
•
Pollution Degree: 2
•
Impulse Voltage: 2500V
•
Disconnection Type: Micro
1.
Open the My Leviton app.
2.
Tap icon to turn ON/OFF.
Test My Leviton
app control
Quick tip
•
The My Leviton app includes many features such as:
scheduling, remote control, vacation mode,
auto-shutoff, room scenes, and advanced options for
bulb type, fade rates, preset light level, and minimum
dim/maximum brightness.
•
Additional self-service support options can be found
in the My Leviton app or at leviton.com/decorasmart.
Test and install
(continued)
3.
Gently push wires
into wall box.
Screw dimmer
to box.
4.
Snap on Decora
®
wallplate and
restore power.
Turn off power at the circuit breaker
before screwing in your dimmer.
Once power is restored, the status
LED will blink GREEN indicating
your device is in setup mode. See
page 15 if your Status LED is not
blinking GREEN.
Congratulations
Your Decora Smart Dimmer
is ready to control your light.
To download the app,
visit
my.leviton.com
and select the link or scan
the below QR code for your device.
Get the app
Device setup
Add your device to
My Leviton
•
Decora Smart Wi-Fi 2
nd
Gen devices can be connected to
the My Leviton service, Apple HomeKit, or both.
•
For voice control with Amazon Alexa or Google Assistant,
you will need to setup the device with My Leviton.
•
For voice control with Siri, you will need to connect your
device to Apple HomeKit. See page 14 for instructions on
how to add your device to Apple HomeKit.
1.
Make sure the device is in setup mode (status LED should
be blinking GREEN). If the status LED is not blinking
GREEN, see page 15 for instructions on how to put the
device in setup mode.
2.
Launch the My Leviton app.
3.
Log in or choose “Sign Up” for an Account.
4.
Follow the instructions on the screen.
5.
Once logged in tap the “+” in the bottom menu and select
“Add Device”.
6.
Follow the app instructions to add your device and
connect it to your home Wi-Fi network.
Connect to My Leviton
partners
(optional)
Visit
my.leviton.com
for a complete list of
compatible smart home products.
Hey Google
works with
Add your device to Apple
HomeKit
(optional)
NOTE:
Skip step 1 if your device is already enrolled to My Leviton and
on your Wi-Fi network.
1.
Make sure the device is in setup mode (status LED should be
blinking GREEN). If the status LED is not blinking GREEN, see
page 15 for instructions on how to put the device into setup mode.
2.
Using an iOS device, open the Apple Home app and select “Add Accessory”.
3.
Make sure your Decora Smart Wi-Fi Dimmer is model number D26HD.
Locate and scan the HomeKit setup code on the device or on the
front page of this Getting Started Guide.
4.
Follow the instructions in the Apple Home app.
5.
Once the device is set up, you will be able to voice control your
Decora Smart dimmer with Apple Siri.
1.
Hold the top rocker for 7 seconds.
2.
After the first 7 seconds the status
light will turn AMBER, then release.
3.
The status light will flash GREEN.
The device is now in setup mode.
1.
Hold the top rocker for 14 seconds.
2.
After the first 7 seconds the status light will turn AMBER.
Continue to hold.
3.
After 7 more seconds, the status light will quickly flash
RED/AMBER.
4.
Release the top rocker and the device will reset.
1.
Tap menu icon in lower
right corner.
2.
Tap Integrations, locate the
desired service, select and
follow the instructions.
Copyright and Trademark Information
Decora and Decora Smart are the registered trademarks of Leviton Manufacturing Co., Inc., registered in the
U.S., Canada, Mexico and China.
Google and Google Play are trademarks of Google LLC. Alexa, and related logos are trademarks of Amazon.
com, Inc. or its affiliates. Apple
®
, HomeKit
®
, and Siri
®
are trademarks of Apple Inc., registered in the U.S. and
other countries. IFTTT and the Wi-Fi CERTIFIED logo are trademarks of their respective owners and any use
of such marks by Leviton is under license.
Use of the Works with Apple badge means that an accessory has been designed to work specifically with
the technology identified in the badge and has been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards.
Use herein of other third party trademarks, service marks, trade names, brand names and/or product names
are for informational purposes only, are/may be the trademarks of their respective owners; such use is
not meant to imply affiliation, sponsorship, or endorsement. No part of this document may be reproduced,
transmitted or transcribed without the express written permission of Leviton Manufacturing Co., Inc.
Copyright 2021 Leviton Mfg. Co., Inc.
WEB
VERSION
