For Technical Assistance Call:
1-800-824-3005 (U.S.A. Only)
www.leviton.com
LIMITED 2 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and
not for the benefit of anyone else that this product at the
time of its sale by Leviton is free of defects in materials
and workmanship under normal and proper use for two
years from the purchase date. Leviton’s only obligation is
to correct such defects by repair or replacement, at its
option, if within such two year period the product is returned
prepaid, with proof of purchase date, and a description of
the problem to Leviton Manufacturing Co., Inc., Att:
Quality Assurance Department, 59-25 Little Neck
Parkway, Little Neck, New York 11362-2591. This
warranty excludes and there is disclaimed liability for labor
for removal of this product or reinstallation. This warranty
is void if this product is installed improperly or in an
improper environment, overloaded, misused, opened,
abused, or altered in any manner, or is not used under
normal operating conditions or not in accordance with any
labels or instructions. There are no other or implied
warranties of any kind, including merchantability and fitness
for a particular purpose, but if any implied warranty is
required by the applicable jurisdiction, the duration of any
such implied warranty, including merchantability and fitness
for a particular purpose, is limited to two years. Leviton is
not liable for incidental, indirect, special, or consequential
damages, including without limitation, damage to, or loss
of use of, any equipment, lost sales or profits or delay or
failure to perform this warranty obligation. The remedies
provided herein are the exclusive remedies under this
warranty, whether based on contract, tort or otherwise.
DI-000-CN220-00A-Pilot
C O L L E C T I O N B Y L E V I T O N
Switching Controller
(Multi-Location)
Cat. No. CN220
24VDC
24mA, 0.6W
For use w/Dimming Power Pack
and other LCnet products
For more information go to
www.leviton.com/centura
INSTALLATION INSTRUCTIONS
DI-000-CN220-00A-Pilot
Frame
Strap
Service
Switch
Snaps
Push in 2 Locations
ON/OFF
LED
Upper
Rocker
Service
Switch
ON/OFF
LED
Lower
Rocker
Figure 1 - Entry Station Functions
Figure 2 - Color Conversion
FEATURES
• Leviton’s Decora
®
Style design
• Rocker mechanism for easy lighting control
• Enables address settings of Controller
• Color conversion available
• Low-Voltage for easy installation
• Fits standard wall box
INTRODUCTION
The Switching Controller, Cat No. CN220, allows easy-to-use manual control of a Centura Lighting
Control System. The Controller can be used to turn ON and OFF dimming loads, but it is intended to
control non-dimming loads. The Controller has a rocker mechanism to provide simple control of your
Power Pack. This allows manual control of your lights and the programming of the address for your Power
Pack from a standard wall box in an easy-to-reach location. In using the Controller, you may override the
automatic operation of the Power Pack to give the most convenience to your lighting needs.
DESCRIPTION
The Controller has a user friendly rocker design. There are two buttons on the face, from top down they
are ON and OFF. The Controller has a removable face so that the colors can be changed.
The Controller is a component of the Centura Lighting System. It is used to provide local user control of
the lights. It provides the ability to program the Power Pack address for multiple Power Pack installations.
The programming sequence is described under the “TO OPERATE” section.
FCC COMPLIANCE STATEMENT
This device complies with part 15, part A of the FCC Rules. Operation is subject to the following two
conditions: (1) This device must not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
INSTALLATION INSTRUCTIONS
WARNING:
TO BE INSTALLED AND/OR USED IN ACCORDANCE WITH APPROPRIATE ELECTRICAL
CODES AND REGULATIONS.
WARNING:
IF YOU ARE NOT SURE ABOUT ANY PART OF THESE INSTRUCTIONS, CONSULT A
QUALIFIED ELECTRICIAN.
CAUTION:
DISCONNECT POWER WHEN SERVICING FIXTURE OR CHANGING LAMPS.
CAUTION:
THE SWITCHING CONTROLLER OPERATES OFF OF LOW-VOLTAGE (24VDC), SO
CARE MUST BE TAKEN WHEN REPLACING A LIGHT SWITCH. CONSULT LOCAL BUILDING CODES
AND REGULATIONS FOR PROPER LOW-VOLTAGE INSTALLATION.
TO INSTALL:
1.
WARNING:
TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR
FUSE AND TEST THAT POWER IS OFF BEFORE WIRING!
2. Remove existing wallplate and switch or dimmer, if applicable
CAUTION:
IF APPLICABLE, ENSURE THAT CIRCUIT CONDUCTORS ARE PROPERLY CAPPED
OFF WITH WIRE CONNECTORS AND REMOVED FROM WALL BOX.
3. Connect lead wires per appropriate WIRING DIAGRAM as follows: Twist strands of each lead tightly
and, with low-voltage wires, push firmly into appropriate wire connector. Screw connectors on
clockwise making sure that no bare conductor shows below the wire connectors. Secure each
connector with electrical tape.
4. Carefully position all wires to provide room in outlet box for Controller. Mount Controller into box with
mounting screws supplied.
5. Restore power at circuit breaker or fuse. INSTALLATION IS COMPLETE.
COLOR CONVERSION PROCEDURE
The color of this device can be changed to suit your interior design requirements. Simply obtain a color
conversion kit of the appropriate color from your Leviton distributor and proceed as follows (please note
that wallplate must be removed).
1. Select the color of the face you desire.
2. The frame has snaps on its sides. Using a small screwdriver, gently remove the frame from the strap
(refer to Figure 2).
DI-000-CN220-00A-Pilot1
9/21/01, 4:34 PM
1
