USER MANUAL - INFLATABLE FOILBOARDS
13
8 PACKAGING AND DISPOSING OF USED PARTS
All parts are packed in a cardboard box
•
Take the parts out of the box.
•
Remove the packing film from the product parts.
•
Check the product parts for the completeness of its scope of delivery.
•
Check the product parts for possible damage that may have occurred during trans
-
portation.
•
The cardboard box and PE film can be recycled.
After replacing individual components:
•
All metal parts can be recycled (scrap metal).
•
The board and straps must be disposed of as residual waste.
Federal, state or local regulations must always be observed when disposing of the pro
-
duct or parts thereof.
7 REPAIR
Pointed objects and strong pressure could damage the surface of the board, which usu
-
ally only affects the top layer. In the case of small holes and cuts (maximum 12mm), the
repair can also be carried out by using the repair kit provided.
•
Clean the damaged area (free of grease and dust).
•
Cut the patch to size (round corners and always at least 7cm in diameter).
•
Apply contact adhesive 3 times on both sides very thinly, in between always leave
to dry for 5 minutes.
•
On the last run let it dry for 10 minutes.
•
Put the repair patch onto the repair area and press firmly (do not move any more).
•
Let it harden for 24 hours.
•
If the bonded point is leaky, the process must be repeated. Possible reasons:
•
Too much glue applied.
•
While application of the repair patch the adhesive was still too liquid.
•
A too small repair patch.
Before repeating the repair 100% of adhesive residues have to be removed.
Содержание BOOM AIR
Страница 1: ...INFLATABLE FOILBOARDS USER MANUAL ...
Страница 2: ...RELEASE DATE JANUARY 2022 VERSION GDM001707 ENG E ...
Страница 16: ......
Страница 17: ......