Levita HC 101, Руководство пользователя

Страница: 7 / 20

7
E
N
GL
IS
H
LEVITA HC-101
5.2 Blade maintenance
To maintain your clipper in good condition, the blades should be
oiled every few haircuts.
Do not use hair oil, grease, oil mixed with kerosene ore any solvent. As
the solvent will evaporate and leave the thick oil, which may block the
blades motion.
1. Remove the comb attachment by pressing the comb lock and by
sliding it from the appliance.
2. Push the middle part of the cutting unit upwards with your thumb
until it opens and then pull it off the appliance.
3. Be careful that the cutting unit does not fall to the floor.
4. Clean the cutting unit with the brush supplied.
5. Oil the blades.
6. Align and click the blades back to the unit.
6 Specifications
Power: 230V - 50Hz - 6W
Battery: 2 x 600mA - Ni-Mh
7 Disposal of the device
At the end of the product lifecycle, you should not throw this product into the
normal household garbage but bring the product to a collection point for the
recycling of electrical and electronic equipments. The symbol on the product,
user guide and/or box indicate this.
Some of the product materials can be re-used if you bring them to a recycling
point. By re-using some parts or raw materials from used products you make an
important contribution to the protection of the environment. Please contact your local
authorities in case you need more information on the collection points in your area.
8 Levita warranty
8.1 Warranty period
The Levita units have a 24-month warranty period. The warranty period starts on the day
the new unit is purchased. Levita does not give any warranty on standard or
rechargeable batteries (AA/AAA type). Consumables or defects causing a negligible
effect on operation or value of the equipment are not covered.
The warranty has to be proven by presentation of the original or copy of the purchase
receipt, on which the date of purchase and the unit-model are indicated.