Levita BPM ARM 6400, Руководство пользователя, Страница: 18 / 28

18 REV 1.1 - U8006182
18
BPM Arm 6400
10 Applying the cuff
11 Taking measurement
1. Remove all watches, jewellery, etc. prior to
attaching the Arm cuff.
2. Press your brachial artery by two fingers
approximately 2,5 cm above the elbow on the
inside of your left arm to determine where your
strongest pulse is.
3. Slide the end of arm cuff furthest from the tube
through the metal ring to a loop. The smooth
cloth should be on the inside of the cuff. The
Velcro will be on the outside of the cuff.
4. Put the left arm through the cuff loop. The
bottom of the cuff should be approx. 1,5 cm
above the elbow. The cuff should lie over the
brachial artery on the inside of the arm.
5. Pull the cuff so that the top and bottom edges
are tightened around your arm.
6. When the cuff is positioned properly, press the
Velcro firmly against the pile side of the cuff.
The metal ring will not touch your skin.
7. Relax your entire body, especially the area
between your elbow and fingers. Place your
elbow on a table so that the cuff is at the same
level as your heart. Avoid leaning back while
the measurement is being taken.
When the batteries are installed.
• Press the mode button to activate the display. The
memory zone is displayed.
• Press the mode button repeatedly to select the
desired memory zone.
• Press the start/stop button to start measurement.
After all segments are displayed, the cuff will inflate to a
level that is right for you.
FP
4
4
5
HL_BPMArm6400 Levita NL-UK.book Page 18 Monday, January 11, 2010 2:51 PM