9
•
Standby mode (sleep):
To switch the air-conditioning unit to the standby mode, push the arrow up button in
the cooling mode simultaneously with the fan button until the air-conditioning unit
enters the energy-saving and silent mode.
After activation of this mode with the air conditioning unit ON and with the Cooling
function set up, the pre-
set temperature in the room is increased by 1°C after the first
hour, then again by 1°C after the next hour, and then the temperature is stabilise
d at
this level. This means that the air conditioning unit is operated for a shorter period of
time and therefore the operation of the unit is quieter.
2.
Remote control
Remote control description:
Remote control buttons and their functions:
ON/OFF
SWITCH
Using this button, the air conditioning
is switched on and off.
MODE
Push this button to toggle between the
cooling, fan, and dehumidification
modes.
UP
Increases the temperature or timer
value.
DOWN
Decreases the temperature or timer
value.
FAN
Push this button to set the high,
medium, or low speed of the fan.
TIMER
Push to switch the timer on / off.
TILTING
Push this button to tilt the louvres for
the air flow direction setting.
TEMPERATURE
UNITS
Push the switch to toggle
between °C
and °F.
STANDBY
MODE
Push this button to switch on the
standby mode.
3.
Protective functions
3.1.
Freezing protection control:
If the temperature in the outlet pipe drops too low in the cooling, dehumidification
or energy saving mode, the air conditioning unit will be automatically switched to
the protected status. When the temperature in the outlet pipe increases above a
specified value, the air conditioning unit returns to normal operation mode.