PRECAUTIONS
The following operational policies please read before you start with blowguns work. Just ensure
safety when using this type of device for yourself and other persons in the vicinity.
Dry and compressed air shall be determined at the inlet pressure of 0.1 to 0.6 MPa and
must be supplied in sufficient quantities. Higher pressure reduces the lifetime of the
device due to faster wear and the risk of injury.
The connection to the compressed air must be prescribed dimensions.
The device must be protected against dirt. Therefore, it is necessary to keep all inlet and
outlet openings.
Special attention should be paid to water, the presence of which causes damage to the
device. Do not forget to daily discharged from the pressure vessel compressor condensed
water and always dry and hoses that air overdriving.
Never hold the gun involved in the direction opposite face.
When working, always wear protective clothing: goggles, gloves, cover the mouth and
nose.
Before each use, make sure they have the prescribed dimensions and connections are in
order.
After completion of work, clean the gun.
OPERATION
1.
Gun first connect with the hose, which will supply air (the hole in the handle)
2.
By pressing the trigger gun will start to work.
MAINTENANCE
Keep it clean. Regularly lubricate the moving parts of the trigger.
Equipment store in a dry area, protected from the weather.
Stored near chemicals and gases, causing corrosion is inaccessible.
To prevent damage to the unit during transport, pack it securely and use the original packaging.
SUPPLIER: LEVIOR s.r.o.
