iLevil 3 AW Company Standards
Effective Date
12/22/17
Page
5
of
10
Document No.
46
Revision
1
Code Number
D-0010
ADS-B Receiver
Transmission
Frequency
978/1090 MHz (Dual Band)
RTCA 282-B
Weight
311 g
Dimensions
3.2” x 5” x 1.1” (8 x 13 x 3 cm)
Table 1. Technical Specifications
3.
Design Specifications
3.1
Material Requirements
The outer housing of the ILEVIL 3 AW is made of extruded aluminum with plastic bezels on
each end and stainless-steel screws.
3.2
Design Requirement
All systems of the ILEVIL 3 AW must meet all the design parameters as set by the different
system’s operational requirements and/or drawing specifications. Engineering drawings must
include the information necessary to duplicate each product to comply with this standard.
4.
Flammability Testing Requirements
The material of the ILEVIL 3 AW, produced under this design standard, must comply with
the requirements of Civil Aeronautics Regulation 3, definition of flame resistance, when
tested as a complete assembly.
5.
Structural Strength Requirement
The structure must be able to sustain 6G pull test in the vertical axis when installed. This is
equivalent to a 0.75lbs x 6Gs = 4.5lb of pull. Side forces should be at least 2lbs of pull.
6.
Software Validation
Software/Hardware integration shall be designed and tested using ASTM F3153-15 practices
and reports.
7.
Electronic Emissions
Wi-Fi equipment has been tested and found to comply with the limits for a Class digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
