mini-lock screws
mini-lock nut
Prepping for the base
Lay the unit on its back
with the drawer handle
facing up. Insert a mini-lock
screw into each of the four
holes in the bottom frame
and tighten firmly with a
Phillips screwdriver until the
screws touch the shoulder.
2
Attaching the base
Align the screws with the holes on the file base and push until fully inserted
and the base is attached.
Insert a mini-lock nut into each of the four holes. Make sure the arrow on
each mini-lock nut faces out and lines up with its mini-lock screw. When fully
inserted, use the screwdriver and turn each mini-lock nut clockwise
approximately
1
⁄
2
turn, locking it into position. This assembly will now be
referred to as Unit 1.
3
MINI
-
LOCK
ASSEMBLY
Unit 1
unit
mini-lock screws
unit
base
