C A R E
Feed each electronic
device’s charger plug
and cord through the
slot on the Valet ’s
upper deck to the inner
chamber, and plug into
the surge protector.
Close the doors. Cords
are now detangled and
out of sight. Place your
devices into their
respective chargers.
3
Pull the cord through.
Place power strip inside
the chamber. Plug into a
wall outlet. The Valet is
now ready for use.
2
A S S E M B LY
A S S E M B LY
(
C O N T I N U E D
)
To set up your
Morgan Charger Valet,
open the two doors on
the front panel and
push the plug and cord
of the surge protector
through the opening in
the back panel.
The upper deck of your Morgan Charger Valet is made of synthetic
material and should be cleaned using a soft, damp cloth and allowed
to air dry. Do not use polishes or cleaners.
The exterior is made of leather. Under normal conditions, regular
dusting will keep the leather clean. If you spill a liquid on it, try to
blot off the excess immediately. Most leathers repel liquids naturally;
however, if left standing some moisture will be absorbed. Let the
area air dry. Do not use abrasive substances such as saddle soaps,
furniture polishes or cleaners with ammonia. If absolutely necessary,
use clean water only. Remove the surge protector before cleaning.
IMPORTANT:
Always unplug the unit and remove the surge
protector prior to cleaning, and make sure the unit is completely
dry before resuming use.
1
